Tour Edge Exotics Wingman Custom Fit Wedge
Tour Edge Exotics Wingman Custom Fit Wedge - Image 2
Tour Edge Exotics Wingman Custom Fit Wedge - Image 3

Tour Edge Exotics Wingman Custom Fit Wedge

$139.00

  • Club Configuration

    *Select Hand
    *Select Club(s)
    *Select Club(s)
    *Lie Angle

    Lie Angle manipulates the turf interaction with the sole of the club.  A lie that is too upright will lead to shots missed to the left and inconsistent ball striking.  A lie that is too flat will lead to shots missed to the right with inconsistent ball striking as well.  It is best to have the turf interaction in the middle of the sole for optimal results.

    *Loft Angle

    Loft Angle can help manipulate distance as well as ball flight. A stronger loft angle will promote a lower ball flight and longer distance, while a weaker loft angle with launch the ball higher and shorter than a standard set up.

  • Shaft Configuration

    Select Shaft & Flex

    *Shaft upcharge is shown per selected club(s). Shafts marked with (*) indicate exotic shafts and take an additional 3-4 weeks before delivery.

    Shaft Length

    Length is taken off of the grip end of the shaft and can be altered based on standard specifications. This alteration has no impact on the overall playability of the shaft.

    For most iron models, manufacturers offer lighter weight heads which can be used to keep the swingweight to a standard balance for club lengths up to +1/2″ longer. Anything longer than that and the swingweight will increase above the recommended balance. (As a rough calculation, every extra 1/2″ in length will increase the swingweight by 3 balance points).

    Shaft Stepping

    Shaft stepping is used when optimal shaft configuration is between flexes. Hard stepping moves the bend point of the shaft to a position where the club feels stiffer, launches lower, and spins less. Soft stepped shafts promote a higher ball flight, more spin, and softer feel.

    All wedges can only be soft stepped. Hard stepping is not possible.

    Custom Ferrule(s)*

    All custom ferrules come from our partner, Boyd Blade & Ferrule Co. (BB&F Co.)

    Select Ferrules(s)

    *Custom Ferrule(s) installation is an exclusive service that must be completed in our build shop and could add an additional 5-7 days before your order is shipped. Pricing is shown per club.

    *

    The SST PURE service analyzes the structure of any golf shaft and identifies its most stable plane under load. When assembled in this SST PUREd® orientation, the result is improved consistency in both distance and accuracy from club to club.

    *SST PUREing is an exclusive service that must be completed in our build shop and could add an additional 5-7 days before your order is shipped. Pricing is shown per club.

  • Grip Configuration

    Select Grip & Size

    *Grip upcharge is shown per selected club(s).

    *Grip Wraps

    Adding additional grip wraps helps to make the grip feel and play larger. This option is used when the best fit for a grip is in between sizes. In general, four wraps of tape is the equivalent to moving to the next size larger grip. Some golfers prefer the tape method of increasing grip size because it decreases the amount of taper felt on the lower hand when gripping the club.

    *Grip Graphics

    Choose whether or not you would like the logo of your grip up (visible at address) or down (hidden at address).

  • Estimated build time is 1-2 weeks.


    This product usually ships direct from the manufacturer. Many items ship within 1-2 weeks, but longer delays may occur due to component backorders. If backorders do occur, we will contact you to discuss all available options.

    Shafts marked with a (*) indicate an exotic shaft and take an additional 3-4 weeks for delivery.

    SST PUREing is done in our Custom Shop and takes an additional 5-7 days to complete and ship out.

    Customized items could be subject to extended delays and cannot be returned. By clicking Add To Cart, you understand and accept the ship time and return policy.

PRECISION MILLED SOLE GRINDS – The sole is uniquely milled into three different grinds: an F/S Grind for a Firm Turf/Sweeping Path tendency player (6°/8° Bounce), a M/N Grind for a player with a Medium Turf/Neutral Path (10° Bounce) and a S/D Grind for a Softer Turf/Digging Path tendency player (12°/14° Bounce).

F/S GRIND FIRM TURF/ SWEEPING PATH
The F/S ‘Firm Sweeper’ plays on predominantly firm ground and/or has a sweeping attack angle at the ball. Firm ground conditions and/or a shallower sweeping path require less bounce on the sole of the wedge to minimize turf interaction.

M/N GRIND MEDIUM TURF/ NEUTRAL PATH
The M/N ‘Mid Neutral’ plays on predominantly medium firm ground (or a variety of firm and soft ground) and/or has a neutral attack angle at the ball. Medium ground conditions and/or a neutral attack angle benefit from mid bounce on the sole of the wedge.

S/D GRIND SOFT TURF/ DIGGING PATH
The S/D ‘Soft Digger’ plays on predominantly soft ground and/or has a deep, digging attack angle at the ball. Soft ground conditions and/or a digging attack angle require more bounce on the sole of the wedge to assist the wedge from digging into the turf.

VIBRCOR TECHNOLOGY POCKETS – Deep undercut pockets were machined to house the proprietary VIBRCOR performance TPU. VIBRCOR creates a distinct feel at impact that dampens sound and shock, while also increasing the MOI and perimeter weighting of the wedge that adds forgiveness.

MILLED HIGH-TOE PAD DESIGN – The “winged” weight pad on the toe creates a higher Center of Gravity for lower launch and greater spin. The High-Toe Pad holds the face slightly open to optimize the face angle from full shots to flop shots. This works in perfect conjunction with the offset design to deliver more accuracy and control. The High-Toe wing progresses in thickness as loft increases to maintain ideal launch performance through each loft.

TRIPLE-TRACTION MILLED FACE TECHNOLOGY – The new Triple-Traction Face technology features three milled areas on the face: milled grooves, milled micro-grooves in between the scoring lines and milled toe lines. The larger strike area on a face is 10% larger than a traditional wedge, boosting spin in every condition and allowing for added versatility and creativity from your wedge play.

CONSTANT OFFSET DESIGN INSPIRED BY BERNHARD LANGER – One of the major keys to the Wingman’s forgiving nature is the 3.0mm constant offset applied to the design.

Hall of Famer Bernhard Langer was instrumental in the design of the Wingman Wedge. A strong proponent of the benefits of offset technology in wedges, Langer is adamant about the performance benefits it offers both professionals and amateurs alike.

The offset in a wedge automatically keeps your hands forward in front of the leading edge. This promotes more of a downward strike that eliminates improper lift at impact that leads to inefficient wedge play. Offset is rare in wedges, and even more so in forged wedges. It presents the bounce in a more ideal angle to the turf that lends to cleaner contact and ease of control, especially with inconsistent wedge swings.

Langer has already put Wingman wedges in his bag on the PGA TOUR Champions and is raving about their accuracy and ease of use that he looks for in his wedges.

ADJUSTABLE WEIGHTING- A 5-gram weight installed in the middle of the VIBRCOR pockets allows for swing weight adjustability. Other weights are available in 2.5 grams, 7.5 grams, 10 grams and 12.5 grams to dial in swing weight and feel for perfected customization.

WE USE COOKIES BASED ON YOUR BROWSING ACTIVITIES TO HELP IMPROVE OUR SERVICES, MAKE PERSONAL OFFERS, AND ENHANCE YOUR EXPERIENCE.
More info Accept