Tour Edge Exotics E725 Custom Fit Driver

$399.99

  • Club Configuration

    *Select Hand
    *Select Club(s)
    *Select Club(s)
    Adaptor Setting

    Adaptor Setting

    *

    Hot Melt can be used to increase the swing weight of the club. In addition, the weight can be inserted into specific areas of the head to manipulate launch, spin, and (or) direction. All Hot Melt materials come from hotmelt.com

    *Hot Melt is an exclusive service that must be completed in our build shop and could add an additional 5-7 days before your order is shipped. Pricing is shown per club.

  • Shaft Configuration

    Select Shaft & Flex

    *Shaft upcharge is shown per selected club(s). Shafts marked with (*) indicate exotic shafts and take an additional 3-4 weeks before delivery.

    Shaft Length

    Length is taken off of the grip end of the shaft and can be altered based on standard specifications. This alteration has no impact on the overall playability of the shaft.

    For most iron models, manufacturers offer lighter weight heads which can be used to keep the swingweight to a standard balance for club lengths up to +1/2″ longer. Anything longer than that and the swingweight will increase above the recommended balance. (As a rough calculation, every extra 1/2″ in length will increase the swingweight by 3 balance points).

    Tip Trim

    Choose whether or not you would the club end of your shaft tipped.  By doing this, you ultimately change the characteristics  to launch the ball lower and provide less spin by strengthening the dynamics of the shaft.

    *

    The SST PURE service analyzes the structure of any golf shaft and identifies its most stable plane under load. When assembled in this SST PUREd® orientation, the result is improved consistency in both distance and accuracy from club to club.

    *SST PUREing is an exclusive service that must be completed in our build shop and could add an additional 5-7 days before your order is shipped. Pricing is shown per club.

  • Grip Configuration

    Select Grip & Size

    *Grip upcharge is shown per selected club(s).

    *Grip Wraps

    Adding additional grip wraps helps to make the grip feel and play larger. This option is used when the best fit for a grip is in between sizes. In general, four wraps of tape is the equivalent to moving to the next size larger grip. Some golfers prefer the tape method of increasing grip size because it decreases the amount of taper felt on the lower hand when gripping the club.

    *Grip Graphics

    Choose whether or not you would like the logo of your grip up (visible at address) or down (hidden at address).

  • Estimated build time is 1-2 weeks.


    This product usually ships direct from the manufacturer. Many items ship within 1-2 weeks, but longer delays may occur due to component backorders. If backorders do occur, we will contact you to discuss all available options.

    Shafts marked with a (*) indicate an exotic shaft and take an additional 3-4 weeks for delivery.

    SST PUREing is done in our Custom Shop and takes an additional 5-7 days to complete and ship out.

    Customized items could be subject to extended delays and cannot be returned. By clicking Add To Cart, you understand and accept the ship time and return policy.

10K MOI Forgiveness

Our highest ever Moment of Inertia rating based on the combined horizontal and vertical MOI of the clubhead that surpasses 10,000 g-cm2. 10K MOI greatly increases stability for less twisting at impact, which leads to tighter dispersion and straighter shots. Improving a golfer’s accuracy off the tee by leaps and bounds.

Flight Tuning System

This all-new Flight Tuning System features an 18-gram weight at the extreme trailing edge on the sole of the clubhead that’s easily able to move to the Draw, Neutral or Fade weight ports that have been designed for the 725 series.

360° Ridgeback Technology

This Ridgeback 360-degree brace acts as a brace for the entire clubhead to produce more power across the entire face, including the extreme perimeters. Adding additional Titanium to the entire perimeter with a thicker ridge at center face allows more support on off-center hits to increase face deflection.

3D Diamond Face

New 3D Diamond Face is made up of new three-dimensional shapes of
variable thickness behind the face. There are 61 total diamond shapes feature on 3D Diamond face, comprising seven different 3D thicknesses in an interweaving pattern. The mini-trampolines that make-up 3D Diamond Face create faster ball speeds and an expanded sweet spot.

Power Channel

The Power Channel creates better weight distribution and increased face flexing and delivers amplified ball speed and less spin, as well as added forgiveness on shots struck lower on the face.

Finned Internal Ribbing

Upgraded acoustic engineering is achieved through Finned Internal Ribbing strategically placed on the inside of the clubhead. Internally, the finned ribbing bounce sound on the inside of the club head to provide top-shelf sound and feel.

LOFTLOFT/LIE SETTING O(STD) O- -- U- UO U+ ++ O+LENGTH
9°9°/58.5° STD8°/59° -1°7°/59.5° -2°8°/60.5° -1° DRAW9°/61.5° STD/DRAW10°/61° +1°/DRAW11°/60° +2°10°/59° +1°45.5"
*10.5°10.5°/58.5° STD9.5°/59° -1°8.5°/59.5° -2°9.5°/60.5° -1°/DRAW10.5°/61.5° STD/DRAW11.5°/61° +1°/DRAW12.5°/60° +2°11.5°/59° +1°45.5"
12°12°/58.5° STD11°/59° -1°10°/59.5° -2°11°/60.5° -1°/DRAW12°/61.5° STD/DRAW13°/61° +1°/DRAW14°/60° +2°13°/59° +1°45.5"

Available in right hand. *10.5° available in left hand. Stock sole weight: 18g rear weight. Additional sole weights available for purchase in 5g, 8g, 10g, 13g, 15g, 20g, 23g, 25g and 28g.

WE USE COOKIES BASED ON YOUR BROWSING ACTIVITIES TO HELP IMPROVE OUR SERVICES, MAKE PERSONAL OFFERS, AND ENHANCE YOUR EXPERIENCE.
More info Accept