Cobra 3DP Tour Custom Fit Irons
Cobra 3DP Tour Custom Fit Irons - Image 2
Cobra 3DP Tour Custom Fit Irons - Image 3
Cobra 3DP Tour Custom Fit Irons - Image 4

Cobra 3DP Tour Custom Fit Irons

$350.00

  • Club Configuration

    *Select Hand
    *Select Club(s)
    *Select Club(s)
    *Lie Angle

    Lie Angle manipulates the turf interaction with the sole of the club.  A lie that is too upright will lead to shots missed to the left and inconsistent ball striking.  A lie that is too flat will lead to shots missed to the right with inconsistent ball striking as well.  It is best to have the turf interaction in the middle of the sole for optimal results.

    *Loft Angle

    Loft Angle can help manipulate distance as well as ball flight. A stronger loft angle will promote a lower ball flight and longer distance, while a weaker loft angle with launch the ball higher and shorter than a standard set up.

    Precision Adjustment(s)*

    All precision adjustments are performed using Mitchell® Golf equipment.

    Digital Loft & Lie

    Digital Loft & Lie allows for tighter tolerances over standard analog equipment.

    *Digital Lie Angle

    Lie Angle manipulates the turf interaction with the sole of the club.  A lie that is too upright will lead to shots missed to the left and inconsistent ball striking.  A lie that is too flat will lead to shots missed to the right with inconsistent ball striking as well.  It is best to have the turf interaction in the middle of the sole for optimal results.

    *Digital Loft Angle

    Loft Angle can help manipulate distance as well as ball flight. A stronger loft angle will promote a lower ball flight and longer distance, while a weaker loft angle with launch the ball higher and shorter than a standard set up.

    Swing Weighting

    Swing Weighting is the process of adding weight to the tip and/or grip area of the shaft to balance the golf club according to the preference of the player.

    *Target Swing Weight

    Target Swing Weight May Not Always Be Possible. If we cannot hit a Target Swing Weight, we will contact you before the build starts.

    *Mitchell precision adjustment(s) are an exclusive service that must be completed in our build shop and could add an additional 5-7 days before your order is shipped. Pricing is shown per club.

  • Shaft Configuration

    Select Shaft & Flex

    *Shaft upcharge is shown per selected club(s). Shafts marked with (*) indicate exotic shafts and take an additional 3-4 weeks before delivery.

    Shaft Length

    Length is taken off of the grip end of the shaft and can be altered based on standard specifications. This alteration has no impact on the overall playability of the shaft.

    For most iron models, manufacturers offer lighter weight heads which can be used to keep the swingweight to a standard balance for club lengths up to +1/2″ longer. Anything longer than that and the swingweight will increase above the recommended balance. (As a rough calculation, every extra 1/2″ in length will increase the swingweight by 3 balance points).

    Shaft Stepping

    Shaft stepping is used when optimal shaft configuration is between flexes. Hard stepping moves the bend point of the shaft to a position where the club feels stiffer, launches lower, and spins less. Soft stepped shafts promote a higher ball flight, more spin, and softer feel.

    All wedges can only be soft stepped. Hard stepping is not possible.

    Custom Ferrule(s)*

    All custom ferrules come from our partner, Boyd Blade & Ferrule Co. (BB&F Co.)

    Select Ferrules(s)

    *Custom Ferrule(s) installation is an exclusive service that must be completed in our build shop and could add an additional 5-7 days before your order is shipped. Pricing is shown per club.

    *

    The SST PURE service analyzes the structure of any golf shaft and identifies its most stable plane under load. When assembled in this SST PUREd® orientation, the result is improved consistency in both distance and accuracy from club to club.

    *SST PUREing is an exclusive service that must be completed in our build shop and could add an additional 5-7 days before your order is shipped. Pricing is shown per club.

  • Grip Configuration

    Select Grip & Size

    *Grip upcharge is shown per selected club(s).

    *Grip Wraps

    Adding additional grip wraps helps to make the grip feel and play larger. This option is used when the best fit for a grip is in between sizes. In general, four wraps of tape is the equivalent to moving to the next size larger grip. Some golfers prefer the tape method of increasing grip size because it decreases the amount of taper felt on the lower hand when gripping the club.

    *Grip Graphics

    Choose whether or not you would like the logo of your grip up (visible at address) or down (hidden at address).

  • Estimated build time is 2-3 weeks.


    This product usually ships direct from the manufacturer. Many items ship within 2-3 weeks, but longer delays may occur due to component backorders. If backorders do occur, we will contact you to discuss all available options.

    Shafts marked with a (*) indicate an exotic shaft and take an additional 3-4 weeks for delivery.

    SST PUREing is done in our Custom Shop and takes an additional 5-7 days to complete and ship out.

    Customized items could be subject to extended delays and cannot be returned. By clicking Add To Cart, you understand and accept the ship time and return policy.

COBRA 3DP Tour Irons – The Most Forgiving Blade Ever Made

Revolutionary 3D Printed Performance

The COBRA 3DP Tour Irons are engineered using cutting-edge 3D printing technology, unlocking a new level of performance for golfers seeking precision, forgiveness, and consistency. Crafted from 316 stainless steel, these irons feature an internal lattice structure that optimizes weight distribution, resulting in an exceptionally forgiving blade design.

Why Choose the 3DP Tour Irons?

  • 3D Printed Steel Construction – Unlike traditional cast or forged irons, 3D printing provides unparalleled design freedom, allowing for a more refined weight distribution and optimized clubhead performance.

  • Forgiving Players’ Blade Shape – Experience the precision and feel of a blade with the stability of a game improvement iron. This revolutionary design delivers higher MOI for added forgiveness and lower CG for an optimal launch angle.

  • Internal Lattice Structure – Utilizing advanced topology optimization, COBRA engineers have redistributed 33% of the clubhead weight, ensuring maximum stability and forgiveness in a compact blade profile.

  • Extreme Forgiveness Meets Soft Feel – The internal lattice not only enhances weight savings but also fine-tunes the acoustics, delivering a pure, satisfying sound and feel at impact.

  • Tungsten Weighting for Stability – With up to 100g of tungsten strategically positioned in the heel and toe, these irons achieve a perfect balance of control, launch, and forgiveness—without compromising the sleek, compact look that better players demand.

ClubLoftLie AngleOffset (mm)LengthSteel FlexSteel SWRH/LH
319.0°60.00°3.439.25"S, RD2RH/LH
421.5°60.50°338.75"S, RD2RH/LH
524.0°61.00°2.738.25"S, RD2RH/LH
627.0°61.50°2.437.75"S, RD2RH/LH
731.0°62.00°2.137.25"S, RD2RH/LH
835.0°62.50°236.75"S, RD2RH/LH
940.0°63.00°1.736.25"S, RD2RH/LH
PW45.0°63.50°1.636.00"S, RD3RH/LH
GW50.0°63.50°1.635.75"S, RD3RH/LH

Note: Shaft & Grip Custom Only - No stock shaft & grip.

Return Policy: This product is not eligible for return.

WE USE COOKIES BASED ON YOUR BROWSING ACTIVITIES TO HELP IMPROVE OUR SERVICES, MAKE PERSONAL OFFERS, AND ENHANCE YOUR EXPERIENCE.
More info Accept